The Trane S9X2B060U4PSBB is a 60,000 BTU two-stage gas furnace with up to 96% AFUE efficiency. It features a stainless steel heat exchanger system, 9-speed ECM blower motor, and flexible upflow or horizontal installation, delivering reliable, energy-efficient residential heating and consistent airflow.

Unit Type: Gas Furnace
Product Line: S9X2
Operating Mode: Heating & Cooling
System Capacity: 60,000 BTU
Line Set Size: 1/2"

Indoor Unit S9X2B060U4PSBB

1st Stage Capacity up to 37,830 BTU
2nd Stage Capacity up to 58,200 BTU
Room Cooling/Heating Capacity up to 2,250 sq ft

Features and Benefits
Up To 96.0% AFUE on S9X2 Furnace Models
Meets utility rebates
Lowers utility bills
Electrically Efficient
Efficient airflow design reduces electrical energy use
34-Inch Tall
Lighter, easier to move and fit into tight spaces like short basements or tight closets
Works great with larger, high-efficiency coils
No knockouts
3–Way Multi-Poise / Dedicated Downflow
6 SKU’s — Upflow / Horizontal Left / Horizontal Right
5 SKU’s — Downflow
Added application flexibility and reduction in specification errors
Airflow
At least 400 CFM/ton at 0.5-inch H20 external static pressure
Regulatory
All models are air tight; 1% or less air leakage as per ASHRAE 193
Open vestibule design provides a full 34-inch high open vestibule
Dimensions
Widths are industry standard: 17.5 inch, 21 inch, and 24.5 inch
Depth remains approximately 28-inch
Cabinet will be compatible with industry standard coils, as well as, other accessories
Integrated Furnace Control
Setup / Status / Diagnostics / Digital Display
No dip switches
Last six errors stored
Dry contact EAC and HUM connections
All multi-pin polarized terminals; no spade terminals
Low voltage labeled above and below
Tubular Stainless Steel Primary Heat Exchanger
29–4C Stainless Steel Secondary Heat Exchanger
Stainless steel is a more durable, corrosive-resistant material than aluminumized steel
Integrated rail system for easy access if required
Reduces or eliminates need for baffles
Vortica Blower, Designed Exclusively For The S-Series Furnace
Improved airflow efficiency
Durable, easy to clean, two piece housing
Single piece belly band/ motor arm assembly
Blower deck has full-length rails for easy removal and replacement, regardless of poise
Three–Way Multi-Poise (Upflow, Horizontal Left And Right) Plus Dedicated Downflow
Easier to specify
Shipped ready to install (no conversion kits required)
Every model has at least two venting options
Barbed fitting on trap at hose connection and on cabinet transition for hose has barbed fitting and
clamps at both ends for leak resistance.
Vent table improvements including longer vent lengths; 2-inch pipe can be used up to 100K

Airflow CFM: 840-1,001-1,140-1,208-1,299-1,413-1,444-1,727-1,790
Size W x D x H: 34" x 17-1/2" x 28-3/4"
Weight: 122 lbs