Mitsubishi PEAD-AA30NL & SUZ-AK30NLHZ 30K BTU ducted heat pump delivers efficient year-round comfort with H2i® Hyper-Heating, 100% heating capacity at 5°F, R-454B refrigerant, quiet operation, slim concealed design, and reliable cold-climate performance.

Unit Type: Single Zone
Product Line: PEAD Series
Operating Mode: Heating & Cooling
Low Ambient Heat: Yes
Number of Zones: 1
System Capacity: 30,000 BTU
Line Set Size: 3/8" x 5/8"
WiFi Enabled: Yes with Comfort App
WiFi Built In: No

Indoor Unit PEAD-AA30NL
Outdoor Unit SUZ-AK30NLHZ

Cooling Capacity up to 30,800 BTU
Heating Capacity up to 34,000 BTU
SEER2 19.5
EER2 12.3
HSPF2 8.5
Heating Minimum Temp -22.5 F
Cooling Minimum Temp N/A
Room Cooling/Heating Capacity up to 1,250 sq ft

INDOOR UNIT FEATURES
Wi-Fi Optional: A Wireless Interface Adapter can be ordered as an accessory for field installation.
Four Speed Fan: Adjust the fan between four speed settings to optimal comfort.
Auto Changeover: The unit will automatically switch between heating and cooling modes to maintain your desired temperature.
Condensate Lift Mechanism: Reduces the need for an additional pump to remove condensate. Units with a condensate lift mechanism also include an
overflow safety switch.
Light Commercial: Light commercial applications include small offices, restaurants, and retail.
OUTDOOR UNIT FEATURES
H2i® Hyper-Heating: 100% heating capacity down to 5° F .
Inverter Driven Compressor: Inverter technology uses only the precise amount of energy needed to keep a space comfortable.
Blue Fin Coating: Anti-corrosion coating that protects the outdoor heat exchanger against salt, sulfur, and other airborne contaminants that impact the
efficiency and performance of the outdoor units.
Base Pan Heater: This advanced base pan heater helps to prevent interrupted operation due to water freezing after a defrost cycle, ensuring your
warmth and comfort during colder weather.
Seacoast Protection: An anti-corrosion treatment applied to the aluminum fins of the heat exchanger of the outdoor unit to protect against corrosion
caused by salt, sulfur, and other airborne contaminants, especially in coastal and industrial areas.
Flash Injection: Flash Injection enables optimum compressor performance when it is running at higher speeds to maintain indoor comfort during cold
temperatures

Airflow Cooling CFM, Dry: 618-671-742-883
Airflow Heating CFM, Dry: 618-671-742-883
Noise Level dB(A), Cooling: 30-32-34-38
Noise Level dB(A), Heating: 30-32-34-38
Size W x D x H: 43-5/16" x 28-7/8" x 9-7/8"
Weight: 67 lbs