The Mitsubishi MLZ-KX09NL & SUZ-AA09NLHZ is a 9,000 BTU ceiling cassette heat pump with Hyper-Heating technology for full heat at 5°F and operation down to -13°F. Ideal for 350 sq ft rooms, it features quiet performance, smart controls, and a flush-mount design.

Unit Type: Single Zone
Product Line: M-Series
Operating Mode: Cooling & Heating
Number of Zones: 1
System Capacity: 9,000 BTU
Line Set Size: 1/4" x 3/8"
WiFi Enabled: Yes with Comfort App
WiFi Built In: Yes

Indoor Unit MLZ-KX09NL
Grille MLP-449WU
Outdoor Unit SUZ-AA09NLHZ
Remote Controller INCLUDED

Cooling Capacity up to 9,000 BTU
Heating Capacity up to 14,500 BTU
SEER2 16.7
EER2 12.3
HSPF2 9.7
Heating Minimum Temp -22.5 F
Cooling Minimum Temp -1 F
Room Cooling/Heating Capacity up to 350 sq ft

INDOOR UNIT FEATURES
• Adjustable fan speeds and vane directions
• Auto Vane Control: Outlet vanes can be moved left and right, and up and down using the remote controller. This improved air flow control feature solves
the problem of drafts
• Built-in condensate lift mechanism (19.6”): Reduces the need for an additional pump to remove condensate water
• Econo Cool: Econo Cool temporarily and automatically adjusts the airflow based on heat exchanger temperature. The set temperature is increased
slightly, which saves energy, while maintaining comfort.
• Fits between 16” joists spacing
• Multiple control options including: Hand-held Remote Controller (provided with unit), comfort app, third-party interfaces and both wired and wireless
controllers
• Serviceable from the bottom (electrical and flare connections)
• Stylish, square design panel
• Washable antibacterial and deodorizing filter
• Weekly Timer Function: Easily set desired temperatures and operation ON/OFF times to match lifestyle patterns. Reduce wasted energy consumption
by using the timer to prevent forgetting to turn off the unit and eliminate temperature setting adjustments.
• Wi-Fi enabled units pair with the Comfort app for complete control over temperature, fan speeds, modes, schedules, and more.
OUTDOOR UNIT FEATURES
• Blue Fin Coating: An anti-corrosion treatment applied to the aluminum fins of the heat exchanger of the outdoor unit to protect against corrosion caused
by salt, sulfur, and other airborne contaminants, especially in coastal and industrial areas.
• Built-in base pan heater
• Hot-Start Technology: Hot-Start Technology ensures the fan only activates once the heat exchanger is warm, preventing cold air blasts during start-up.
• Hyper-Heating INVERTER® (H2i®): 100% heating capacity down to 5° F with guaranteed heating down to -13° F.
• Joint Lap DC Motor: Innovative Joint Lap DC Motor leads to high efficiency and reliability
• Outdoor unit directed power: The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when
power returns
• Pulse Amplitude Modulation technology: Pulse Amplitude Modulation technology enhances energy efficiency by adjusting the power supply to optimize
compressor performance, ensuring precise capacity control and reduced energy consumption.
• Quiet operation: Quiet operation units are as quiet as a typical conversation, and most indoor units are whisper quiet.

Airflow Cooling CFM, Dry: 201-254-282-311
Airflow Heating CFM, Dry: 212-247-290-325
Noise Level dB(A), Cooling: 27-31-34-38
Noise Level dB(A), Heating: 26-29-34-37
Unit Size W x D x H: 43-3/8" x 14-3/16" x 7-5/16"
Weight: 34 lbs