Mitsubishi KD 18,000 BTU 22 SEER M-Series Horizontal Ducted Single Zone Heat Pump System. This is an extremely efficient heating and cooling option for a large-sized room up to 850 sq ft, located under the attic or above the crawl space or basement.

Unit Type: Horizontal Ducted
Product Line: M-Series KD
Operating Mode: Cooling & Heating
Low Ambient Heat: No
Number of Zones: 1
System Capacity: 18,000 BTU
Line Set Size: 1/4" x 1/2"
WiFi Enabled: Yes with Kumo Cloud or Aidoo Wifi
WiFi Built In: No

Indoor Unit SEZ-KD18NA
Outdoor Unit SUZ-KA18NA
Mounting and Insulating Hardware
Remote Controller NOT INCLUDED

Cooling Capacity up to 18,900 BTU
Heating Capacity up to 25,600 BTU
SEER 22.0
EER 13.7
HSPF 13.2
Heating Minimum Temp -9 F
Cooling Minimum Temp 14 F
Room Cooling/Heating Capacity up to 850 sq ft

Concealed horizontal-ducted unit for applications with short duct runs
Static Pressure capability adjustable up to 0.20 in. WG
Ultra-thin body: 7-7/8" high
Quiet operation
Dehumidification mode for improved comfort
Built-in condensate lift mechanism (lifts to 21-21/32")
WiFi enabled (requires Kumo Cloud or Aidoo wifi Adapter)
Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life

Airflow Cooling CFM, Dry: 635-529-423
Airflow Cooling CFM, Wet: 572-476-381
Airflow Heating CFM, Dry: 635-529-423
Noise Level dB(A), Cooling: 38-34-30
Noise Level dB(A), Heating: 38-34-30
External Static Pressure in.WG: 0.02-0.06-0.14-0.20
Size W x D x H: 46-7/8" x 27-9/16" x 7-7/8"
Weight: 54 lbs