Mitsubishi KD 18,000 BTU 19.1 SEER M-Series Hyper Heat Horizontal Ducted Single Zone Heat Pump System. This is an extremely efficient heating and cooling option for a large-sized room up to 850 sq ft, located under the attic or above the crawl space or basement, when you need extra heating capability at very low outdoor temperatures.

Unit Type: Horizontal Ducted
Product Line: M-Series KD
Operating Mode: Cooling & Heating
Low Ambient Heat: Yes
Number of Zones: 1
System Capacity: 18,000 BTU
Line Set Size: 1/4" x 1/2"
WiFi Enabled: Yes with Kumo Cloud or Aidoo Wifi
WiFi Built In: No

Indoor Unit SEZ-KD18NA
Outdoor Unit SUZ-KA18NAHZ
Mounting and Insulating Hardware
Remote Controller NOT INCLUDED

Cooling Capacity up to 18,000 BTU
Heating Capacity up to 28,000 BTU
SEER 19.1
EER 13.1
HSPF 10.9
Heating Minimum Temp -14 F
Cooling Minimum Temp 14 F
Room Cooling/Heating Capacity up to 850 sq ft

Concealed horizontal-ducted unit for applications with short duct runs
Static Pressure capability adjustable up to 0.20 in. WG
Ultra-thin body: 7-7/8" high
Quiet operation
Dehumidification mode for improved comfort
Built-in condensate lift mechanism (lifts to 21-21/32")
WiFi enabled (requires Kumo Cloud or Aidoo wifi Adapter)
H2i® hyper heat performance offers 100% heating capacity at 5°F
Outdoor Unit has built-in base pan heater
Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
Blue Fin anti-corrosion treatment applied to the outdoor unit heat exchanger for increased coil protection and longer life

Airflow CFM, Dry: 635-529-423
Airflow CFM, Wet: 572-476-381
Noise Level dB(A), Cooling: 38-34-30
Noise Level dB(A), Heating: 38-34-30
External Static Pressure in.WG: 0.02-0.06-0.14-0.20
Size W x D x H: 46-7/8" x 27-9/16" x 7-7/8"
Weight: 62 lbs