The Mitsubishi 12,000 BTU P-Series Multi-Position ducted air handler provides a solution to cool and heat zones in commercial spaces, or residential homes that need more capacity. It is unique in that it can be installed either vertically or horizontally. The PVA-A12AA7 & PUZ-A18NKA7 has selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting. It also has a 1 inch R4.2 fiberglass free insulation that reduces condensation and boosts efficiency.

This system is perfect for customers that need to condition an entire house with existing ducted work while still experiencing the savings and comfort that comes with all Mitsubishi products.

Mitsubishi 12,000 BTU 21.4 SEER Standard P-Series Multi-Position Air Handler Heat Pump System

Indoor Unit: PVA-A12AA7
Outdoor Unit: PUZ-A12NKA7
Remote Control NOT INCLUDED

Cooling Capacity 12,000 BTU
Heating Capacity up to 19,000 BTU
SEER: 21.4
EER: 13.4
HSPF: 10.3
Heating Lockout Temperature: 8 F
Cooling Minimum Temp: 0 F (with wind baffle)
Room Cooling/Heating Capacity up to 550 sq ft

INDOOR UNIT FEATURES
• Ducted air handler provides a solution to cool and heat large zones
• Highly efficient totally enclosed ECM motor
• Selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting
• 1 inch R4.2 fiberglass free insulation reduces condensation and boosts efficiency
• Positive pressure cabinet with air leakage of less than 1.0% at 1.0 in.WG
• Unique blow through design allows simple coil cleaning when the blower is removed
• Multi-position installation: horizontal (left or right), vertical (up or down). For downflow configurations, the CMA-1 is recommended for proper
management of condensate to prevent water blow-off in certain conditions
• Optional electric heat kit for additional heat capacity
• Optional humidifier control and ERV control
• Multiple control options available:
○ kumo cloud® smart device app for remote access
○ Third-party interface options
○ Wired or wireless controllers
OUTDOOR UNIT FEATURES
• Variable speed INVERTER-driven compressor
• Power receiver pre-charged with refrigerant volume for piping length up to 70 ft
• Low ambient cooling down to 0°F providing 100% capacity
• 24-hour continuous operation (cooling mode)
• High pressure protection
• Fast restart
• Superior energy and operational efficiency
• Seacoast protection on heat exchanger and base panel (rated for 2,000 hours in accordance with ASTM B117 testing)

Noise Level: Cooling: 27-35 dB(A)
Noise Level: Heating: 27-35 dB(A)
Size W: 17" x H: 50-1/4" x D: 21-5/8"
Weight: 113 lb